Jed Belt MGS (Modular Belt System)
The Jed Belt MGS is the basic component of our modular belt system and can be upgraded to a posture belt, certified according to EN358, a seat belt EN12277 or a full body harness EN361.
Due to the AustriAlpin D-Ring Cobra and a specially designed seam pattern, which can absorb forces from all directions, this belt has a breaking load of> 30kN (> 3059kg).
The 43mm wide, double-layered, TYPVII webbing made in Germany, according to our specifications, ensures a comfortable fit with maximum resistance for everyday use. The belt is stiffened with a plastic insert and is particularly suitable for fastening heavy objects. On the inside of the belt, VELCRO® Brand Loop® is sewn over the entire length to accommodate the adapter for our MGS leg loops or other accessories.
The D-Ring Cobra is simply clicked shut and locks reliably. The lock can only be opened with no loading on the Cobra and both lock transmitters must be activated simultaneously, which guarantees safe handling.
The excess length for size adjustment is cut diagonally for better handling and fixed with a hook-and-loop piece, allows the belt to be adjusted by 10cm in circumference.
The Jed Belt MGS achieves the following certifications:
In combination with our modular belt MGS or comparable: EN358 retaining belt
In combination with our leg loops MGS EN12277 TYP C seat harness (climbing harness)
In combination with our chest harness MGS EN12277 TYPE A complete harness AND EN361 full body harness
- G1 80cm-90cm
- G2 85cm-95cm
- G3 90cm-100cm
- G4 95cm-105cm
- G5 100cm-110cm
- G6 105cm-115cm
- G7 110cm-120cm
- > 120 or <80cm as an individual one-off production.
!! IMPORTANT SIZE NOTE !!
In order to avoid unnecessary returns and the associated effort, it is essential to observe the following information on determining the size.
To get the correct waist size / belt length, proceed as follows:
- Wearing trousers that are normally used with a belt on duty / everyday life
- NO belt shall be looped into the pants
- Pull the tape measure through the flaps of the trousers
- Read off the waistline
The determined waist measurement applies to a belt that is worn with trousers, if the belt is to be used over clothing or e.g. in the battle belt, the measuring tape must be placed over the clothing or through the battle belt to determine the size.
Which does not work:
- Measure any available belt
- converting the pants size
- reckonning, guessing, cartomancy
If you have any questions or uncertainties, get advice by phone -> +49 (0) 7582 675 9825 or by email at firstname.lastname@example.org
|Product weight:||0,35 Kg|