Operator Belt Hybrid Black G1 80cm-90cm

Item number: A-1025-001

Category: Battle Belts

For this product you will receive 96.25 Reward Points

96,25 €

including 19% VAT. , plus shipping

2 Piece In stock

Shipping time: 2 - 3 workdays

Only 2 Piece left in stock!

Combat Belt Hybrid

The outside of this belt has been provided with a PALS + / Molle compatible laser cut laminate layer, on the inside VELCRO® Brand Hook® is sewn.

The Combat Belt Hybrid has the following attributes: 

  • Original AustriAlpin Cobra Pro Style 
  • 7075 CNC milled safety lock, breaking load 18kN in the strapping 
  • No unilateral opening possible, both lock transmitters must always be activated 
  • No opening under load, the lock can only be opened when the load is removed 
  • Class 7a seatbelt with a breaking load of 2700kg according to MIL-W-4088. 
  • Double-layered webbing and treated with resin to achieve a good balance between strength and comfort 
  • High-tenacity special yarn "Made in Germany" 
  • The excess length is rolled up and secured on the surface 
  • Outside made of Cordura laminate according to Bundeswehr TL PALS + / Molle compatible 
  • Inside covered with hook-and-loop fastener.

The belt is designed as a pure outer belt and should therefore be worn in combination with a suitable inner belt.

Molle pockets should be >3 molle columns high for optimal attachment on the belt.

Standard sizes:

  • G1 80cm-90cm
  • G2 85cm-95cm
  • G3 90cm-100cm
  • G4 95cm-105cm
  • G5 100cm-110cm
  • G6 105cm-115cm
  • G7 110cm-120cm
  • > 120 or <80cm as an individual custom made belt.


To avoid unnecessary returns and the associated effort, it is essential to observe the following information on size determination.

To get the correct waist size / belt length, proceed as follows:

  1. Wear trousers that are normally used with a belt on duty / everyday life 
  2. NO belt should be looped into the pants 
  3. Pull the tape measure through the flaps of the trousers 
  4. Read off the waistline

The waist measurement determined in this way, applies to a belt that is worn in trousers. If the belt is going to be used over clothing or in the battle belt, place the measuring tape over the clothing or through the battle belt to determine the size.

To use a combination of upper and lower belt, the lower belt must be ordered according to your actual size, the upper belt must be ordered one number (5cm) larger to compensate the difference in circumference of the lower belt.

Which does absolutely not work: 

  • Measure the existing belt 
  • converting the pants size 
  • reconning, guessing, cartomancy

If you have any questions or uncertainties, get advice by phone -> +49 (0) 7582 675 9825 or by email at kontakt@md-textil.de

All belts we offer are carefully handcrafted in Germany.


We must point out that this belt, despite the high load capacity, is not a belt for personal safety or as a PPE replacement. If you need a belt approved as PPE, please use the models from the MGS (modular belt system) series.

Product weight: 0,33 Kg

Please login first to add a tag.

Other customers have also bought the following items
Underbelt Loop Velcro SNAP-Buckle Black G1 80cm-90cm

Underbelt Loop Velcro SNAP-Buckle Black G1 80cm-90cm

45,47 € *
5 Piece In stock
Underbelt Loop Velcro 40mm Black G1 80cm-90cm

Underbelt Loop Velcro 40mm Black G1 80cm-90cm

37,40 € *
1 ordered, expected on 31.01.2023
Anti-Rutsch Einlage Black G1 80cm-90cm

Anti-Rutsch Einlage Black G1 80cm-90cm

32,03 € *
10 Piece In stock
Vegvísir Leatherpatch Brown

Vegvísir Leatherpatch Brown

14,95 € *
32 Piece In stock
Operator Belt Hybrid Black G2 85cm-95cm

Operator Belt Hybrid Black G2 85cm-95cm

96,25 € *
8 ordered, expected on 23.12.2022
KEILER GEAR web patch

KEILER GEAR web patch

5,36 € *
208 Piece In stock