Cobra Dutybelt with stiffening Black G7 110cm-120cm

Item number: A-202-007

Category: Duty Belts


For this product you will receive 80.19 Reward Points

80,19 €

including 19% VAT. , plus shipping

5 Piece In stock

Shipping time: 2 - 3 workdays

Only 5 Piece left in stock!

Customize options

Here you can personalize your belt, the delivery time increases by 10 working days. Individualized products are excluded from the right of withdrawal.

  • Einzelne Mollereihe die Mittig auf dem Gürtel aufgenäht wird
Underbelt hook tape 40mm

Here you can buy an underbelt with reduced price.
Important size note: underbelt has to fit your actual waist size, outerbelt has to be one size larger than the underbelt

  • The md-textil underbelt has a width of 38mm and is fabricated out of materials according to BW-TL respectively Mil-Spec standards and is covered with VELCRO® Brand Hook® at the outsides.
Underbelt Hook tape 40mm SNAP-Buckle

Here you can buy a SNAP buckle underbelt with reduced price.
Important size note: underbelt has to fit your actual waist size, outerbelt has to be one size larger than the underbelt

  • The md-textil underbelt SNAP-Buckle has a width of 38mm and is fabricated out of materials according to BW-TL respectively Mil-Spec standards, equipped with VELCRO® Brand Hook® at the outsides and can be locked with a SNAP-Buckle.
Your configuration

Cobra duty belt including stiffener

Robust trouser belt with the legendary Cobra buckle, which is reinforced with a plastic insert.

The Cobra duty belt has the following attributes:

  • 100% handcraft in Germany 
  • orig. Cobra-Buckle 7075 CNC milled safety lock, breaking load in the ring 18KN 
  • Unilateral opening is not possible, both lock transmitters must always be activated 
  • no opening under load, the lock can only be opened when the load is removed 
  • Class 7a seatbelt with a breaking load of 2700kg according to MIL-W-4088. 
  • Double-layered webbing and treated with resin to achieve a good balance between strength and comfort 
  • high-tenacity special yarn "Made in Germany" 
  • The excess length is fixed with Velcro and is cut diagonally for better handling 
  • Plastic insert between the webbing layers 
  • continuous Velcro on the inside

The Cobra fastener is unique and impresses with its extremely high load limits through which our belt achieves a total breaking load of 18kN (approx. 1800kg).

Due to the sewn-in plastic insert, this belt is extremely torsion-resistant and cannot warp, which makes it the first choice if you want to attach handguns or other heavy equipment directly to the belt. Velcro is continuously sewn on the inside to secure holsters or bags against slipping.

Standard sizes:

  • G1 80cm-90cm
  • G2 85cm-95cm
  • G3 90cm-100cm
  • G4 95cm-105cm
  • G5 100cm-110cm
  • G6 105cm-115cm
  • G7 110cm-120cm
  • > 120 or <80cm as an individual custom made belt.

!! IMPORTANT SIZE NOTE !!

To avoid unnecessary returns and the associated effort, it is essential to observe the following information on size determination.

To get the correct waist size / belt length, proceed as follows:

  1. Wear trousers that are normally used with a belt on duty / everyday life 
  2. NO belt may be looped into the pants 
  3. Pull the tape measure through the flaps of the trousers 
  4. Read off the waistline

The waist measurement determined in this way, applies to a belt that is worn in trousers. If the belt is going to be used over clothing or in the battle belt, place the measuring tape over the clothing or through the battle belt to determine the size.

To use a combination of upper and lower belt, the lower belt must be ordered according to your actual size, the upper belt must be ordered one number (5cm) larger to compensate the difference in circumference of the lower belt.

Which does absolutely not work: 

  • Measure the existing belt 
  • converting the pants size 
  • reconning, guessing, cartomancy

If you have any questions or uncertainties, get advice by phone -> +49 (0) 7582 675 9825 or by email at kontakt@md-textil.de

All belts we offer are carefully handcrafted in Germany.

ATTENTION:

We must point out that this belt, despite the high load capacity, is not a belt for personal safety or as a PPE replacement. If you need a belt approved as PPE, please use the models from the MGS (modular belt system) series.


Product weight: 0,30 Kg

Please login first to add a tag.


Other customers have also bought the following items
Mora working knive Companion MG

Mora working knive Companion MG

14,95 € *
2 Piece In stock
Battle Belt light Black Size 6 (100)

Battle Belt light Black Size 6 (100)

Now only 27,97 € *
Old price: 39,95 €
Discount: 30%
2 Piece In stock
Polybag Horizontal 5 Farb Flecktarn

Polybag Horizontal 5 Farb Flecktarn

69,50 € *
7 Piece In stock
EUROTRAINING Bundle Coyote Brown

EUROTRAINING Bundle Coyote Brown

239,95 € *
item not available